Victory Motorcycle Accessories

Exhaust Tips, Curved, Slash Cut for Victory

Looking for some attention???
These Curved, Slash Cut Tips add a totally custom look to your pipes and bolt on in minutes! CNC machined from 6061-T-6 Billet Aluminum then mirror polished and triple chrome plated to a show chrome finish. These HOT KewlMetal tips are designed for use on all Victory Stage 1 Drag, Cobra speedsters and Victory Speedsters 2-1/2″ Pipes with removable tips and can be mounted in 8 rotational orientations.

Tags: Exhaust

XC 6 Degree KewlMetal Front End with Contrast Cut TubesXC 6 Degree KewlMetal Front End with Contrast Cut Tubes

Tags: 6 Degree, front end, KewlMetal trees, www.kewlmetal.com

If you own a Kingpin, DON’T buy these boards. . .BECAUSE. . .I want to be the KEWL-est ‘Pin in town. ;0) They installed SO much easier than those BRAND-X boards I replaced. They are AWESOME!!! I chose the “black finish” boards with “chrome backer plate”. As usual the “KEWL KREW” went above & beyond in all aspects of my transaction. I have LINDBY’s MULTIBAR and I had to reposition them just a smidge for a little more clearance on the left side, but I never liked the way the LINDBY’S fit anyway. A great addition to EVERY bike.
THANKS AGAIN TO THE KEWL-KREW!!!

KewlMetal’s NEW Long Boards are 17-1/2” long X 6-1/2” wide. CNC machined from Billet Aluminum then polished to a mirror finish before being triple chrome plated. KewlMetal offers the Long Board bases in 2 different finishes. Chrome or Black Powder Coated. The custom artwork is available in several different designs and you can even get your own personal design cut. All designs are laser cut and coated with a highly durable rubberized finish that will last a lifetime. To set off the custom artwork, KewlMetal offers the backer plates in 3 different finish options: Chrome, Black or Red.
Fitment: Victory® Vision, Cross Country, Cross Roads, Kingpin, Hammer, Jackpot and Vegas. And Harley Davidson® Road Glide, Street Glide and Road King.

*MADE IN THE USA*

NOTE: WHEN ORDERING YOU MUST SPECIFY IN THE COMMENT BOX: YEAR, MAKE AND MODEL OF BIKE, AS WELL AS LOCATION WHERE PEGS WILL BE MOUNTED (FRONT, REAR OR AS A HIGHWAY BOARD) (eg. 2009 Victory Kingpin, Rear).

If you have any questions about ordering please call us at 623-298-7181 and we will help you with your order.

Don’t see any designs you like, we can cut your custom design for a little extra cost, just give us a call. 623-298-7181

“>

KewlMetal’s Long Boards with Black bases, backer plates and blade inlays. 

Check out the image gallery for more pictures:
http://www.kewlmetalstore.com/product_info.php?products_id=682 

Kewl long Boards – Black version 

Kewl Long Boards To shop go to: www.kewlmetalstore.com

LED LongBoards fits Victory & Harley

Fits: the Victory Vision, Cross Country, Cross Roads, Kingpin, Hammer, Vegas and Jackpot. Also fits: Harley Davidson Street Glide, Road Glide and Road king. The optional LED set up can be used for more visibility while driving at night. And set up as blinkers!!! We have several different designs to choose from and we can even cut your personal design into your New KewlMetal Long Boards. So visit us at www.kewlmetalstore.com and see what we might have for you. KewlMetal Products are Proudly Made In The USA!!

KewlMetal Front End Kit-Lehman Trike CrossBow & Victory Vision

8 Degree Triple Tree for the Lehman Trike CrossBow and Victory Vision with the 21″ Front Wheel. These trees increase your rake by 8 degrees to achieve a 3.5 inch reduction in trail for trikes and bikes with larger than stock front wheels. Due to the offset at the top of the trees to clear the fairing and fuel tank on the Vision, these 8 degree trees have the trail reduction similar to a 6 degree tree without the top tree being offset backwards. These are high quality billet aluminum and include a 2 inch extended fork cap to extend your forks and maintain stock ride height. Also includes a new steering shaft and lower bearing. Installation is straight forward and can be done in about 4 hours.

KewlMetal is the Victory Owners No.1 Source for after market
accessories!

*** PROUDLY MADE IN THE USA ***
 
For more information and to place an order visit www.kewlmetalstore.com or call 623-298-7181

Tags: 8 degree trees, front end, KewlMetal trees, Victory Cross Bow

“>

Custom Triple Tree Set, 7 Degree Rake 

Custom Triple Tree Set, 7 Degree Rake

Custom Triple Tree Set, 7 Degree Rake

Custom Triple Tree Set, 7 Degree Rake

 Item # KD-217. Fits the Victory Hammer, Kingpin and Pit Boss Trike.

 The KewlMetal 7 Degree Trees are for Trikes with the stock front wheel or
bikes with 21 inch or 23 inch front wheels, or bikes with modified frames,
they are NOT suitable for stock frames with smaller than 21 inch front
wheels, for a stock frame motorcycle, please see our 5 degree tree.

 This chrome billet aluminum triple tree set will totally transform the look
of your front end AND increase your rake by 7 degrees. These trees install
exactly the same way your stock trees install so installation is a breeze.
The kit comes with upper fat fork tubes and lower fat fork tubes and a 2
inch extended fork cap to keep your front end level. These trees are show
quality, machined from 6061 billet aluminum and worthy of any show bike or
your daily rider.

These 7 degree trees decrease the trail from your front steering geometry
making your Trike steering light and easy. These are sometimes called Power
Steering trees for Trikes. If you have a Trike with stock trees, you won’t
believe the difference these trees will make in your riding experience.
Makes your Trike a real joy to ride, not a workout on your arms! These trees
are a must have for your Victory Trike.

To place an order or for more information visit www.kewlmetalstore.com or
call 623-298-7181

 Do you have KewlMetal’s 7 Degree Rake?

 Please send us your pictures of your beautiful Front End to: jamie@kewlmetal.com and we will post the pictures on our site!